Kontron AM5010 BIOS - Manual (Page 72)

Boot Setup AM4010/AM4011/AM5010 BIOS
Page 62 ID 1022-2060, Rev. 2.0
Hit ‘DEL’ Message Display
Optimal and Fail-Safe default settings: Enabled
Interrupt 19 Capture
This function is used to permit option ROMs such as network controllers to trap the BIOS inter-
rupt 19.
Optimal and Fail-Safe default settings: Disabled
Retry Boot Sequence SDO
This function is used to specify how the system is to respond to a boot error.
Optimal and Fail-Safe default settings: Enabled
SETTING DESCRIPTION
Disabled Use this setting to preclude displaying of the message:
"Hit Del to enter Setup"
during memory initialization.
If Quiet Boot is enabled, this message will not be displayed.
Enabled Use this setting to specify displaying of the message:
"Hit Del to enter Setup"
during memory initialization.
SETTING DESCRIPTION
Disabled Use this setting to preclude option ROMs from trapping the BIOS interrupt 19.
Enabled Use this setting to permit option ROMs from trapping the BIOS interrupt 19.
SETTING DESCRIPTION
Disabled Use this setting to direct the termination of booting and the display of an error message when
a boot error has occurred.
Enabled Use this setting to specify that booting should be attempted again until a boot device is
found. To interrupt retrying, the system must be reset.
This setting should be used if the AMC module is to be booted from a network drive.