Terminal type sdo, Vt-utf8 combo key support, Sredir memory display delay – Kontron AM5010 BIOS User Manual
Page 55
AM4010/AM4011/AM5010 BIOS
Advanced Setup
ID 1022-2060, Rev. 2.0
Page 45
Terminal Type
SDO
This function is used to select the target terminal type for the serial port used for console redi-
rection. It is not available if Remote Access is set to Disabled.
Optimal and Fail-Safe default settings: ANSI
VT-UTF8 Combo Key Support
This function is used to enable or disable the VT-UTF8 combo key support for the serial port
used for console redirection. It is not available if Remote Access is set to Disabled.
Optimal and Fail-Safe default settings: Enabled
Sredir Memory Display Delay
This function is used to select the time during which the serial redirection memory usage infor-
mation is displayed on the serial console at start of POST. It is not available if Remote Access
is set to Disabled.
Optimal and Fail-Safe default settings: Delay 4 sec.
SETTING
DESCRIPTION
ANSI
Use this setting to select the target terminal type: ANSI.
VT100
Use this setting to select the target terminal type: VT100.
VT-UTF8
Use this setting to select the target terminal type: VT-UTF8.
SETTING
DESCRIPTION
Disabled
Use this setting to disable the VT-UTF8 combination key support for the ANSI/VT100 termi-
nals.
Enabled
Use this setting to enable the VT-UTF8 combination key support for the ANSI/VT100 termi-
nals.
SETTING
DESCRIPTION
No Delay
Use this setting to disable delaying.
Delay 1 sec.
Delay 2 sec.
Delay 4 sec.
Use one of these settings to specify displaying of the serial redirection memory usage infor-
mation for the time specified (in seconds)