Kontron AM5010 BIOS - Manual (Page 57)

AM4010/AM4011/AM5010 BIOS Advanced Setup
ID 1022-2060, Rev. 2.0 Page 47
TRUSTED COMPUTING SCREEN (AM4011)
This screen provides functions for specifying the trusted computing configuration settings as
well as TPM owner status information. The functions indicated on this screen are only available
when a TPM module is installed.
TCG/TPM SUPPORT SDO
This function is used to specify the initialization of the on board trusted computing module.
Optimal and Fail-Safe default settings: No (if there is no TPM module installed, leave set to No)
Execute TPM command
This function is used to specify the execution of the TPM enable or disable command during
POST. When "Disable" or "Enable" is selected, BIOS executes the selected command during
the POST and then changes the setting back to "Don’t Change".
Optimal and Fail-Safe default settings: Don’t Change
SETTING DESCRIPTION
No Use this setting to disable TCG/TPM support.
Yes Use this setting to enable TCG/TPM support.
SETTING DESCRIPTION
Don’t Change This is the BIOS default setting and is automatically set after each Enable or Disable com-
mand is executed.
Disabled Use this setting to execute the TPM disable command during POST.
Enabled Use this setting to execute the TPM enable command during POST.