Kontron AM5010 BIOS - Manual (Page 45)

AM4010/AM4011/AM5010 BIOS Advanced Setup
ID 1022-2060, Rev. 2.0 Page 35
Set PEF Configuration (AM4011)
This function and the screen associated with it are not supported.
OS Load Watchdog Timer Action SDO
This function is used to specify what action if any the MMC is to perform in the event of a
Watchdog timeout.
Optimal and Fail-Safe default settings: Disabled
MMC Watchdog Timeout SDO
This function is used to specify how long the MMC is to wait before assuming the system is
no longer operating properly and requires remedial action. This function is only available if the
OS Load Watchdog Timer Action function has been set to other than Disabled.
Optimal and Fail-Safe default settings: 5 Min
SETTING DESCRIPTION
Disabled Use this setting to prevent the computer system from invoking the MMC Watchdog function.
Reset System Use this setting to specify that the MMC is to reset the system in the event of a Watchdog
timeout.
Power Down Use this setting to specify that the MMC is to power the system down in the event of a
Watchdog timeout.
Power Cycle Use this setting to specify that the MMC is to turn system power off and then on again in the
event of a Watchdog timeout.
SETTING DESCRIPTION
10 Sec, 30 Sec,
1 Min, 5 Min Use one of these settings to specify how long the MMC is to wait before performing the
action specified by the MMC Watchdog function.