Starting BIOS Setup
AM4010/AM4011/AM5010 BIOS
Page 6
ID 1022-2060, Rev. 2.0
Note:
If the AMC module is connected to a serial terminal, the , and
keys cannot be used via the serial port.
HOT KEY
DESCRIPTION
F1
The key is used to display the General Help screen.
Press the key to open the General Help screen.
F10
The key is used to save any changes that have been made and exit the Setup. Press
the key to save the changes. The following screen will appear:
Press the key to save the configuration and exit. To abort this function and return to
the previous screen, use the key to select Cancel and then press the key.
ESC
The key is used to discard any changes that have been made and exit the Setup. Press
the key to exit the Setup without saving the changes. The following screen will appear:
Press the key to discard changes and exit. To abort this function and return to the
previous screen, use the key to select Cancel and then press the key.
Enter
The key is used to display or change the function setting listed for a particular setup
item. The key can also be used to display the setup sub-screens.
