Am4010 led control screen (am4010), Led configuration – Kontron AM5010 BIOS User Manual
Page 104
OEM Feature
AM4010/AM4011/AM5010 BIOS
Page 94
ID 1022-2060, Rev. 2.0
AM4010 LED CONTROL SCREEN (AM4010)
This screen provides one function for specifying a configuration setting.
LED Configuration
This function is used to specify the configuration of the User-Specific LEDs upon completion of
booting. For further information, refer to the AMC module’s user guide.
Optimal and Fail-Safe default setting: DIAG
SETTING
DESCRIPTION
POST
Use this setting to specify that the LEDs are to remain in the POST display mode.
In this case, the LEDs reflect the contents of the I/O 80h register.
MODE A
Use this setting to specify mapping of the LEDs to MODE A.
MODE B
Use this setting to specify mapping of the LEDs to MODE B.
MODE C
Use this setting to specify mapping of the LEDs to MODE C.
DIAG
Use this setting to specify mapping of the LEDs to DIAG mode.