Remote access configuration screen, Remote access sdo, Serial port number sdo – Kontron AM5010 BIOS User Manual
Page 53: Remote access sdo serial port number sdo
AM4010/AM4011/AM5010 BIOS
Advanced Setup
ID 1022-2060, Rev. 2.0
Page 43
REMOTE ACCESS CONFIGURATION SCREEN
This screen provides functions for specifying configuration settings.
Remote Access
SDO
Optimal and Fail-Safe default settings: Enabled
Serial Port Number
SDO
This function is used to select the serial port for console redirection. It is not available if Remote
Access is set to Disabled.
Optimal and Fail-Safe default settings: COM1
SETTING
DESCRIPTION
Disabled
Use this setting to prevent the BIOS from using Remote Access.
Enabled
Use this setting to permit the system to use the remote access feature.
The remote access feature requires a dedicated serial port connection.
SETTING
DESCRIPTION
COM1
Use this setting to select COM1 (communication port 1) as the remote access interface.
COM2
Use this setting to select COM2 (communication port 2) as the remote access interface.
COM3
COM3 is the COM port of the 82571EB Ethernet controller. Console redirection is not sup-
ported on this port.