Kontron AM5010 BIOS - Manual (Page 43)

AM4010/AM4011/AM5010 BIOS Advanced Setup
ID 1022-2060, Rev. 2.0 Page 33
Set LAN Configuration Screen
This screen provides functions to program the MMC with an IP address, a MAC address, a sub-
net mask and a gateway address. For further information concerning these settings, refer to
the IPMI 1.5 Specification, Section 19.1.
Channel Number
Channel Number Status
This is a display only function which indicates the validity of the channel number set with the
Channel Number function.
SETTING DESCRIPTION
Use this function to specify the channel number for IPMI communications. If IPMI
communicates through LAN channel 1, the channel number should remain at “01” and
so on.