EFCO 904 Series - Manual (Page 43)

GLASS STOP
Vertical glass size formula is DLO + 1". Horizontal glass size
DLO + 1 1/4" between butt glazed mullions and captured jambs.
formula is DLO + 1 1/2" between butt glazed mullions, and
glass units into contact with the now exposed adhesive.
Remove the exterior protective film on the glazing tape and press the
JAMB
[FIG. 47]
GLASS UNIT
BUTT GLAZED
GLASS UNIT
GAP
[FIG. 48]
GAP
MULLIONS
GLASS UNIT
GLASS
BITE
1/2"
3/4"
3/4"
BITE
GLASS
BITE
GLASS
3/4"
1/2"
BITE
GLASS
3/4"
B)
GASKET RUNS THRU
AT VERTICALS
1/2"
DPS 12/2002
BITE
GLASS
1/2"
JAMB
At the jamb, install the glazing stop and the vertical glazing gasket.
WHEN THE GLASS UNITS ARE POSITIONED CORRECTLY- STEP 8)
2 PC. JAMB
A)
PAGE 41
(CONT.) FOR BUTT GLAZED VERTICAL
SECTION V A - GLAZING PROCEDURES
Quick Set