EFCO 403 Series Storefront - Manual (Page 93)

EFCO CORPORATION 1/2013 PART NO. Y001 Page 93 of 94
Series 401,402, & 403 Installation Instructions
THE FRAME
UNTIL LEVEL WITH
TAP INTO PLACE
USE #9261 FOR 1/4" THICK GLASS
USE #9260 FOR 1/2" THICK GLASS
SECTION V: F.
9261
Fig. # 113
9261
for 1/4" and 1/2" GLASS
1" POCKET REDUCERS
.750 .500
9260
9261
9236
Due to extrusion tolerances and varying thickness of
painted finishes, it may be necessary to tap the pocket
reducers into place using a hammer and a 6" long block of
wood.
Care must be taken not to bend the pocket reducer as it is
being tapped into position. This may be a permanent
installation and careful locating procedures must be taken.