Dynojet 248x: Pit Installation Guide - Manual (Page 15)

Document #98219100 1 - 11
Step 4
Verify that the cardboard boxes contain the
following:
Brake Hardware:
• 2 brake weldments
(The following are attached to the dyno
frame)
• six 5/8" bolts
• six 5/8" lock washers
• six 5/8" flat washers
• six 5/8" nuts
Mounting Hardware:
Support Hardware:
2 Long lateral Supports
2 Short lateral Supports (in the non brake side of
the dyno frame).
Electronic Hardware:
Pictures and descriptions on page 3-6:
9- 1" UNC nuts
3- 1" Lock washers
6- 1" Flat washers