Dynojet 248x: Pit Installation Guide - Manual (Page 14)

1 - 10 Document #98219100
Uncrating the Dyno
Step 1
Use a crowbar or the like to remove the plywood
shipping shell from the dynamometer.
• Remove the top of the crate. (If you ordered
the dyno with the optional pit covers, they will
be in the top portion of the crate.)
• Remove the sides of the crate.
• Remove the bottom skids and discard.
Step 2
Carefully remove the cardboard boxes and brake
weldments that are stored within the
dynamometer’s frame.