Salter Brecknell 800 Series - Manual (Page 6)

Page 1 - 1
CHAPTER 1: INTRODUCTION TO THE 800 SERIES DIGITAL INDICATORS
The 800 Series Digital Indicator is a general purpose, industrial grade weight indicator featuring
keyboard tare, piece counting operation and a custom unit. Four models are currently available,
distinguishable by display type and enclosure type. Table 1-1 shows the 800 series product
matrix. All models operate identically, can readout up to 50,000 display divisions and can supply
enough current for up to 8-350
Ω load cells. All setup parameters may be entered via the front
panel keys, including calibration.
If your Model 800 Series Digital Indicator is part of a complete floor scale or has been installed for
you, you may skip to Chapter 7 for operating instructions. Prior to using the indicator, please read
this chapter carefully and completely. Store the manual in a safe and convenient place so it will
be available if you have questions concerning the operation of the scale.
If you are an installer, the indicator's installation and wiring instructions are found in Chapter 2.
The indicator contains two main setup menus: The Setup (“F”) menu, which configures the
indicator to your weigh platform and the User (“A”) menu, which configures the serial
communication port and enables some user options. Chapter 3 gives an overview and explains
how to use the five front panel keys to maneuver and save settings in both menus. Chapters 4
and 5 explain the Setup and User Menu options, respectively. Chapter 6 covers system
calibration. Prior to installing the indicator, please read this manual carefully and completely.
Store the manual in a safe and convenient place so it will be available if you have questions
concerning the setup and operation of the scale.
DISPLAY TYPE ENCLOSURE TYPE
800 LED (light emitting diode), 1" tall ABS, NEMA 12 rated
800S LED (light emitting diode), 1" tall Stainless Steel, NEMA 4X rated
TABLE 1-1: 800 Series Product Matrix