Salter Brecknell 800 Series - Manual (Page 24)

5.2.3 Time Entry (A10)
Your 800 series indicator automatically keeps track of the current time for you,
which can then be printed on the print ticket. Use this procedure to set the
current time, which must be set in military (24-hr) format. For example, for 9:00
AM, you would enter 900. For 5:00 PM, you would enter 1700.
1. While in the User Menu mode, scroll to " A 10 ", then scroll down once using
the #2 key to enter the time entry menu.
2. The display will momentarily show " ENT TI ", followed by the current time in
military (24-hr) format.
3. Use the front panel numeric keys to key-in the actual time value. If you
make a mistake, press the CL key to clear your entry and start over.
4. After entering the exact value, press the NET/GROSS key to save the time
value. The display will show " End TI " momentarily, then revert back up to
A10.
5.2.4 Date Entry (A13)
Your 800 series indicator automatically keeps track of the current date for you,
which can then be printed on the print ticket. Use this procedure to set the
current date, which must be set in mm/dd/yy format. For example, for January 7,
1998, you would enter 010798. For November 30, 1998 you would enter 113098.
1. While in the User Menu mode, scroll to " A 13 ", then scroll down once using
the #2 key to enter the date entry menu.
2. The display will momentarily show " ENT DT ", followed by the current date in
mm/dd/yy format.
3. Use the front panel numeric keys to key-in the actual date value. If you
make a mistake, press the CL key to clear your entry and start over.
4. After entering the exact value, press the NET/GROSS key to save the date
value. The display will show " End DT " momentarily, then revert back up to
A13.