Salter Brecknell CB100 - Manual

CB100 Reloading Scale Quick User
Guide
1.1 Quick Start
Follow the steps in this page for a quick start to using the CB100 Reloading
Scale. Detailed instructions are on the following pages.
1. Plug power adapter into wall outlet and connect other end to the scale
or, attach a 9v battery inside the battery compartment and replace
battery cover.
2. Press ON/OFF key to power up scale. Scale must warm up 2-3
minutes before accurate weighing is possible.
3. Use screw feet and bubble level to level the scale on a solid flat
surface.
4. Place weighing pan on scale.
CAUTION: To prevent damage to the scale, do not
physically press on the platform or exceed the rated
capacity of the scale.