Salter Brecknell 800 Series - Manual (Page 31)

7.3.2 TARING AN ITEM OF UNKNOWN WEIGHT
To weigh an item in a container, the weight of that container must first be subtracted
from the overall weight to obtain an accurate weight reading. This is known as
taring.
For your convenience, the 800 series indicator retains this tare weight value even
when the unit is powered off.
1. Select the desired weighing unit by pressing the UNITS key until that unit is
indicated on the display.
2. If necessary, press the ZERO key to obtain a weight reading of zero.
3. Place the empty container on the scale’s platter and allow the weight indication to
stabilize.
4. Press the TARE key. The display shows zero weight and turns the NET
annunciator on.
5. Place the material to be weighed in the container and allow the weight indication
to stabilize.
6. Read the weight shown on the display.
7. You may toggle between the gross weight and the net weight by pressing the
NET/GROSS key.
7.3.3 TARING AN ITEM OF KNOWN WEIGHT
If the weight of the container or object is known, you may enter this weight via the
keyboard. This value must be rounded to the nearest scale division. For example,
on a 100 x 0.02 lb scale, you must enter the tare weight value to the nearest 0.02 lb.
For your convenience, the 800 series indicator retains this tare weight value even
when the unit is powered off.
1. Select the weighing unit of the known tare weight by pressing the UNITS key until
that unit is indicated on the display.
2. Using the front panel numeric keys, enter the known tare weight. If a mistake is
made, you can press the CL key to clear the entry and re-start.
3. Press the TARE key. If the tare weight is valid, the display shows zero weight
and turns the NET annunciator on. If the tare weight is invalid, you will see an
error message. Refer to Appendix D for displayed error codes and their
meanings.
4. Place the material to be weighed in the container and allow the weight indication
to stabilize.
5. Read the weight shown on the display.
6. You may toggle between the gross weight and the net weight by pressing the
NET/GROSS key.
7.3.4 CLEARING THE TARE WEIGHT VALUE
1. While the indicator is displaying a weight unit (lb, kg, custom unit), press the CL
key.