Salter Brecknell 800 Series User Manual
Page 21
CHAPTER 5: USER MENU DESCRIPTIONS AND PROCEDURES
5.1
USER MENU DESCRIPTIONS
This section provides more detailed descriptions of the selections found in the User Menu
Chart. Factory-set defaults are shown in bold with a checkmark (
√
).
NAME/CODE
DESCRIPTION
CODE/VALUE
A1
Baud Rate
Selects the baud rate for data transmission through both serial ports
(COM1 and COM2).
1200 2400
4800
9600√
√√√
A2
Data Bits and
Parity
Selects the number of data bits and parity of serial transmission.
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
8n√
√√√
7O
7E
7n
A3
COM1 Mode
Selects the mode of the COM1 serial port: Refer to Appendix B for
more information.
"0" = Full Duplex Mode
"1" = Print Ticket Mode
0
1√
√√√
A4
ID No. Enable
Allows the ID number to be disabled in the Print Ticket mode. Valid
only when
A3
is set to “1”.
"0" = Disable the ID No. "1" = Enable the ID No.
0√
√√√
1
A5
ID No. Entry
Actuates the function that allows entry of a new ID No. Valid only
when
A3
is set to “1”. Pressing the
#2
key to scroll down one level
begins the sequence.
0 - 199999 (1510)
0 - 999999 (1500)
123456√
√√√
A6
No. of Line
Feeds
Actuates the function that allows entry of the desired number of line
feeds to be printed in Print Ticket Mode. Valid only when
A3
is set to
“1”. Pressing the
#2
key to scroll down one level begins the
sequence.
0 - 99
8√
√√√
A7
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only
when
A3
is set to “1”.
"0" = Disable Handshaking "1" = Enable Handshaking
0√
√√√
1
A8
Time Enable
Allows the time to be disabled in the Print Ticket mode. Valid only
when
A3
is set to “1”.
"0" = Disable the time printout "1" = Enable the time printout
0√
√√√
1
A9
Time Format
Selects the printed format for current time. Valid only when
A3
is set
to “1” and indicator contains Time and Date option.
"0" = AM/PM "1" = 24 Hr
0√
√√√
1
A10
Time Entry
Actuates the function that allows entry of the current time. Valid only
for indicators containing the Time and Date option. Pressing the
#2
key to scroll down one level begins the test sequence.
Press
#2
key to
begin sequence