Fe lock, Make sure the (v) icon in the viewfinder is on, Focus on the subject – Canon EOS D30 User Manual
Page 94: Take the picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Built-in Flash
FE Lock
FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of
a subject. FE Lock is a function in the Creative zone.
Make sure the (V) icon in the
viewfinder is on.
In the Creative zone, press the ( ^ ) button
to pop up the built-in flash.
Focus on the subject.
Focus on the subject you want to lock the
flash exposure on.
(D-
Place the center focusing point over
the subject, and press the (■}(■>
button. (C16)
The (■)(■) icon lights in the viewfinder.
The Speedlite fires a preflash and records
the required flash output for this subject in
memory.
In the viewfinder, the display appears as
shown in © for 0.5 seconds, then changes
to @.
Each time you press the (*) button the
preflash fires, and the FE lock is applied at
the required exposure level.
Take the picture.
# Compose the shot and take the picture.
O
If the subject is far enough away to cause underexposure, the (^) icon will blink in
the viewfinder. Move closer to the subject and repeat steps 2 - 4 .
94