beautypg.com

Using a household power supply, Connect the dc coupler, Place the cord in the groove – Canon EOS D30 User Manual

Page 29: Insert the dc coupler into the camera, Connect the power cord

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Inserting and Removing the Battery Pack

Using a Household Power Supply

You can operate the EOS D30 from a household power outlet by using the DC coupler. This
enables you to use the camera as long as you like without a battery.

Connect the DC coupler.

, Plug the DC coupler into the compact

power adapter.

Place the cord in the groove.

Carefully insert the cord into the groove.

CD

0

o'

0

c

CD

0

CQ

Insert the DC coupler into the camera.

Cpen the cover (->-27) and lower the
covering on the cord channel.

Insert the DC coupler and fit the cord into

the cord channel.

Check that the cord is placed tightly in the
cord channel, and slide the DC coupler

into the chamber until it locks into place.

Close the cover so that it clicks into place.

Connect the power cord.

Connect the power cord to the compact

power adapter.
Plug the cord into a power outlet.

When you are finished, remove the plug
from the power outlet.

<1

Do not use any DC coupler other than the one provided with your ECS D30

camera.

Do not use the DC coupler provided with your ECS D30 with any other camera.

29