Canon Sure Shot 115U User Manual
Isoreshcfls, Handling precautions, Iowpm:ip
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
CTI-7487-000
© CANON INC. 2002
PRINTED IN CHINA
IMPRIMÉ EN CHINE
IMPRESO EN CHINA
iSORESHCflS®
iOWPM:iP
■yri'.''*-:- ■*? ■ «:•
-n'.'
rVQM»?^->& '^-
^
^iÙRÉ^L
ins|ÌUÌ'étÌQ‘iÌ^
25^-.
*
- ■ ••
K;
ì
^
ììhì
-;-‘'V^/
ì
:.V.--. -
■>.;i-^:uT-'-':=r.->'3i'. ..>:-■»• r-,-i<.-..'-.Tl'VV'j5
Handling Precautions
1. Before taking pictures of important events, such as weddings and trips, check
to make sure the camera is working properly.
2. This camera is not resistant to water, and should not be used outdoors if it is raining
or snowing. Keep the camera out of salt spray and excessive humidity. If used at
the beach, clean it thoroughly afterward with a dry cloth.
3. Store the camera in a cool, dry, dust-free place. Be sure to keep the camera out of
direct sunlight, and away from “hot spots" such as the trunk or rear window shelf of a
car. Avoid places where mothballs are used, and use a desiccant in excessive humidity.
4. Do not attempt to disassemble the camera yourself, since there is high-voltage
circuitry inside.
5. The battery may explode or cause bums if disassembled, recharged, shorted,
exposed to high temperatures, or disposed of in a fire.
6. Use a blower brush to remove dust and sand from the lens and inside the camera.
Do not apply any fluids to the lens or body.
Convention
O
Warnings you should observe when using the camera.
Additional information on using the camera.
Please note that these instructions are for both the model with the date function and
model without date function. Information relevant only to the model with the date
function is marked with the
symbol.
AVAILABLE
COPY
Document Outline
- iSORESHCflS®
- '88 8S:'88-M.SH
- Loading the Battery and Checking the Battery Level
- Loading and Removing the Film
- Taking Pictures in Autofiash (Fuil-auto) Mode
- V<§> Changing the Flash Mode
- Imprinting the Date and Time
- ^ Select the Date mode.
- ^ Select the date and time combination.
- ■ Setting the Date and Time
- "I Select the Date mode.
- ^ Press the Eil button for more than 2 seconds for date/time set mode.
- 3 Press the (S3 button to select the setting position (numbers blinking).
- 4 Press the OH button to set the number.
- ^ Repeat 3 and 4 above to set all digits of the date and time.
- ^ Finish setting the date and time.
- Setting the Custom Functions
- Major Specifications