Program ae, Set the mode dial to (p, Focus on the subject – Canon EOS D30 User Manual
Page 72: Check the display, Take the picture, P program ae
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Program AE
Like (O) (Full Auto) mode, this is a general-purpose
pioture-taking mode. The oamera automatically sets
the shutter speed and aperture value to suit the
scene’s brightness. This is called Program AE.
* P stands for Program
*AE stands for Auto Exposure
Set the Mode Dial to (P>.
Focus on the subject.
Press the shutter button down halfway.
When
the
camera
has
focused,
the
focusing point indicator and the in-focus
indicator in the viewfinder light at the same
time.
Check the display.
The shutter speed and aperture value are
determined automatically, and displayed in
the viewfinder and on the LCD panel.
# If the shutter speed and aperture values
are not blinking, the exposure is correct.
If
either
is
blinking,
see
“Exposure
Warnings" (^134).
Take the picture.
Compose
the
picture,
then
press
the
shutter button down fully.
72