Check the image immediately, Take the picture, Check the image in play mode – Canon EOS D30 User Manual

Page 44: View the image, Change the displayed image, Is check the image in play mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Check the Image Immediately

You can view the images you take immediately, on the LCD monitor on the back of the camera.

Take the picture.

After the picture is taken, the image as it
was shot appears on the LCD monitor.

The image is shown for approximately

2 seconds.

You can turn the Review function on or off, as well as display the image

information display. (^45)

You can change the length of time the image is displayed. (->-46)
You can change the brightness of the LCD monitor. (-»-122)
While a picture is being displayed, you can press the ( button to delete that

image. (->-47)

This will erase the image shown on the LCD monitor before it is written to the CF

card.

Check the Image in PLAY Mode

View the image.

Press the (E) button.

The most recently recorded image appears.

Press the image from the LCD monitor and exit PLAY

mode.

Change the displayed image.

Turn the <

dial counterclockwise to move

back through the images you have taken,

from newest to oldest.

® Turn the

(O)

dial clockwise to move

through the images from oldest to newest.

You cannot use the menu function or playback images while image data is being

written onto the CF card (the access lamp is blinking (->-17)). If you press (MENU)

or the ( E) button, the warning message of “Busy.” (->-137) will appear on the LCD

panel.

You can also view the images you have taken in index form (->-102) or enlarged form

(^103).