Conventions used in this manual – Canon EOS D30 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Conventions Used in This Manual
All descriptions in this manual assume that the Main Switch is already set to (ON). Set it to
(ON) before proceeding with any operation.
® in this manual, the (¿2^) icon indioates the Main Dial.
In this manual the
(O)
icon indicates the Quick Control Dial.
In this manual the (0) ioon indicates the SET button, used to
set menu functions and oustom functions.
In this manual, the [C.Fn] symbol indicates a brief explanation
of the respective custom function. For details, refer to “Custom
Function Settings ”(^124).
The oamera control ioons and markings in this booklet correspond to the icons and
markings on the oamera. See "Nomenclature" on page 16.
Reference page numbers are shown in parentheses (->•■).
The prooedures in this user’s guide use a Canon EF 24-85mm F3.5-4.5 USM lens for
reference.
The descriptions also assume that the menu functions and custom functions are set to the
default settings.
The icons ( Q4 ), ( Q6 ), and ( Q 1 6 ) indicate that the function operates on a timer, and
remains in effect after the button is released. The icons represent 4, 6, or 16 seconds
respectively.
In general, the illustrations used for explaining procedures are taken with a single-lens
reflex camera using 35 mm film.
This user’s guide uses the following symbols as described:
^ : Indicates precautions about potential problems with photographing.
Q : Indicates additional information you may find helpful.
Indicates useful pointers for better camera operation or better photographs.
22