Selecting parameters, From the menu, select [parameters, Set the parameters you want – Canon EOS D30 User Manual

Page 56: Bib selecting parameters, 1ii ml, Pr-0

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ii Ml

Selecting Parameters

In addition to the standard parameters automatically applied by the camera for processing

images recorded, you can register up to three sets of your own parameters. Parameter settings

are made using a computer and the software supplied with your EOS D30 camera, and stored

in the camera by connecting the computer and camera with the proper interface cable provided

with the camera.

For instructions on setting parameters with the software supplied with the EOS D30, as well as

registering parameters in the camera and on connecting your camera to a computer, see the

Software Starter Guide.

Note that if no custom parameters are set or stored using this function, this item will not

appear on the menu.

From the menu, select [Parameters].

Press the

(MENU) button.

# Turn the (O) dial to select [Parameters],

then press the (0) button.

®# The LCD monitor displays the available

parameters.

Set the parameters you want.

Turn the

(O)

dial to select the parameters,

then press the (0) button.

The selected parameters are entered, and

the screen returns to the menu.

Press the

(MENU) button to clear the

screen and exit the menu.

C.Fn

You can set the parameters by pressing the (0) button and turning the (¿Ss) or

(O)

dial as you look at the LCD panel. However if no parameters have been

registered, the message ''

PR-0

” is displayed on the LCD panel and you cannot

set the parameters. (C.Fn-12-3 ->-128)