Shooting, Checking and handling images – Canon EOS D30 User Manual
Page 139
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REFERENCE
Shooting
Unable to shoot or
record images
CF card is not loaded correctly.
Load the CF card correctly. (^31)
CF card is full.
Change to a new CF card, or erase unwanted images.
(^31,47,108)
Tne battery pack is out of power,
Charge the battery pack. (^25)
Image out of focus (In-focus light in the viewfinder blinks).
Press the shutter button down halfway to focus again. If this fails,
focus manually. (->-33, 63)
LCD monitor
displays and images'
are hard to see
Dust or foreign matter on the monitor.
“T Clean the monitor with a soft eyeglass cloth.
LCD monitor is worn out.
Consult the store where you bought your camera, or a Canon
Service Center. (->-12, back cover)
Images are blurred
Lens focusing mode switch set to
(MF)
(or
(M)).
Set the focusing mode switch to
(AF>. (^30)
Hand movement vv-hen the shutter button is pressed.
' Press the shutter button carefully so that the camera does not
move. (^33, 40)
Unable to use the
CF card
CF card data is corrupted.
Format the CF card. (->109)
Use the specified type of CF card. (->3, 141)
The message
“C bC ”
the LCD panel
The backup battery is out of power.
Replace the backup battery. (->24)
Checking and Handling Images
Cannot erase images
Images may be protected.
‘ Remove image protection. (->107)
Incorrect date and
time displayed
Date/Time setting may be
incorrect.
Set date/time correctly. (->38)
No image appears
on the TV screen
Video cable plugs are not inserted fully.
Insert the video cable plugs firmly all the way. (->116)
73
m
n
m
73
m
z
o
m
139