Canon EOS D30 - Manual (Page 82)

jiiS!Autoexposure Bracketing
When using autoexposure bracketing, the camera automatically changes the exposure level
within the set range (up to ±2 stops in 1/2-stop increments) for three successive frames. This is
called AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected
drive mode (-^67) in the following order: correct exposure, underexposure, and overexposure.
Correct exposure (0) Underexposure (-1.0) Overexposure (+1.0)
From the menu, select [AEB].
Press the (MENU) button.
Turn the
(O)
dial to select [AEB], then
press the (0) button.
Set the AEB level.
# Turn the
(O)
dial to set the AEB level you
want, then press the (0) button.
The AEB setting is entered, and the display
returns to the Menu.
Press the (MENU) button to clear the
screen and exit the menu.
- 2 . 1 .liJ.I .2+ :Correct exposure
- 2 . 1 . ^ . 1 . 2 + :Underexposure
- 2 . 1 . ^ . 1 . 2 + :Overexposure
Canceling AEB
Take the picture.
When using continuous shooting, press
and hold the shutter button down fully to
take all three bracketed shots continuously,
and then stop automatically.
When using AEB with the self-timer, the
camera takes the three bracketed shots in
succession after the 10-second timer delay.
Follow steps 1 and 2 to set the AEB level to
< ■ ).
AEB will be automatically cancelled when
the Main Switch is set to (OFF), the lens is
changed, the flash is charged, the battery
pack or the CF card is replaced.
82