Editing procedure, Place second vtr in record pause mode, Press camera play button – Canon E800 User Manual

Page 70: Remote terminai, Edit button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Editing Procedure

Locate a point slightly ahead of editing start point on video

cassette in camera.

• EDIT button is functioned only in stop mode.

Place second VTR in record pause mode.

Press camera PLAY button.

• Check playback picture on TV screen.

Release second VTR from record pause mode at editing

start point.

• Recording begins on second VTR.

STOP

/ ■ o

I' Wifeless

Conlroller

Press STOP buttons on camera and second VTR to end

editing.

Remote Terminai

This terminal is provided to connect this camera to commercially available

video camera recorders, video decks, or editing machines in order to

perform functions such as assembly editing. The operation buttons of other

manufacturers’ equipment may differ from those on this camera. Refer to
the other product’s instrution manual for details.

EDIT Button

EDIT

To minimize loss of picture quality, press EDIT button only when camera is

used as playback VTR during editing.

• “EDIT” should not be displayed normally.

Note:

• Both image and sound quality of edited tape will be somewhat less than that of the original.

Editing to Another VTR