Setting the video channel (european model), Connect ru-e3 to camera and tv, Turn tv on – Canon E800 User Manual
Page 42: Turn camera on, and start playback, Set l/g selector, Switch settings, Ru-e3, Antenna selector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Video Channel (European model)
The RU-E3 is shipped from the factory with the video channel selector set
to channel 32.
Connect RU-E3 to camera and TV.
Turn TV on.
3
PLAY
Turn camera on, and start playback.
Set l/G selector.
• I is for U.K., South Africa, Hong Kong;
G is for Continental European countries.
• If the I/G selector is not set correctly, the video picture will appear but
the audio portion cannot be heard.
Switch Settings
RU-E3
Antenna Selector
Tune TV to channel 32 and adjust it until playback picture
appears clearly on screen.
To set video channel to a position other than 32 (30—39 selectable),
position 36 in U.K. for example. Follow steps 1—5 above. Tune TV to
channel 36. Turn RU-E3’s video channel selector with a flat-edge
screwdriver until playback picture appears clearly on screen again.
Australian model
Video channel selector:
To video channel
European model
I/G selector:
Set according to
TV system
European model
Video channel selector
(see above)
Playback Connection Procedure
29