Ru-e3 rf unit, Parts included with rf unit, Connections (see connection chart on p.27) – Canon E800 User Manual
Page 41: Ru-e3 rf unit parts included with rf unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RU-E3 RF Unit
Parts included with RF Unit
For connection of RU-E3, make sure the following are at hand:
RU-E3 RF Unit
Antenna Selector Coaxial Cable with
DIN-connectors (2)
,n fl n
S-
European Model
l/G Selector
Set according to TV system.
Video Channel Selector
Set to channel reserved for
video in your area (channel
30—39 selectable).
RF Output
XI
□
Australian Model
'7T~
Video Channel
Selector
RF Output
d
3
X
□
Connections (See connection chart on p.27)
1
Attach power source and RU-E3 RF Unit to camera. Leave
camera off.
Connect RF output to VTR terminal of antenna selector
using provided coaxial cable with DIN-connectors.
Remove aerial cable from TV and connect it to ANT.
terminal of antenna selector.
Connect TV terminal of antenna selector to aerial input of
TV using provided coaxial cable with DIN-connectors.
28
Beisic Operations