Press awb/lock button, Make your recording, White balance lock procedure – Canon E800 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
White Balance Lock Procedure
1
Point camera lens at a white object (such as a sheet of
paper) for 10 sec., so that it completely fills viewfinder.
• Set zooming lever to telephoto end.
• Be sure sufficient lighting is available.
• There is no need for focusing.
iAW^ /LOCK
W B L O C K
Press AWB/LOCK button.
• “WB LOCK” appears in viewfinder.
Make your recording.
AWBl /LOCK
Press AWB/LOCK button again to reset auto white balance.
• “WB LOCK” display disappears from viewfinder.
N otes:
• White balance lock clears automatically when playback is activated or the camera is turned off.
• Reset white balance again if the light source changes during white balance lock.
• Use white balance lock even under normal lighting conditions to achieve a more precise colour balance.
White Balance
37