Playback procedure, Press operate button, Press eject button – Canon E800 User Manual
Page 43: Press stop button, Locate playback start point, Press play button to start playback, Press stop button to end playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playback Procedure
Before playback, make sure that all connection procedures are completed
(pp.26—29).
Press OPERATE button.
EJECT
Press EJECT button.
• Video cassette compartment opens.
Push
a
Load video cassette in camera and cióse video cassette
compartment.
• Camera goes into record pause mode.
• Camera goes into stop mode if the erasure prevention switch on the video
cassette is ON (see p.23).
STOP
Press STOP button.
• You must complete step 4 to commence playback.
• Playback functions will not operate if you haven’t pressed STOP, button.
REW
Locate playback start point.
• Use FF or REW buttons to locate start point or use high-speed search
(see p.32).
Press PLAY button to start playback.
• You can also monitor playback in viewfinder.
• Tape speed is selected automatically.
STOP
Press STOP button to end playback.
• The tape rewinds automatically if it is played to the end (automatic rewind
function).
30
Basic Operations