Press start/stop button to start recording, For self timer recording, For interval timer recording – Canon E800 User Manual

Page 62: Press start/stop button again to stop recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press START/STOP button to start recording.

• Selected mode appears in viewfinder.

S E L F 1 0

For self timer recording:

• Countdown 10—1 appears, followed by: Continuous recording (SELF

recording), or Countdown 30—1 display (SELF 30 recording).

• Tally lamp flashes slowly during standby and flashes rapidly when

recording starts.

• Recording starts automatically after countdown.

1 N T .

For interval timer recording:

• After selected mode appears in viewfinder, standby and recording (about

0.5 seconds) are alternately performed.

• Tally lamp flashes slowly during interval timer recording.

Press START/STOP button again to stop recording.

• Camera goes into record pause mode.

Notes:

• Press the START/STOP button to cancel self timer recording during countdown.

• Maximum continuous recording time using a fully charged BP-E77K Battery Pack is about 40 minutes at room

temperature. During interval recording, power consumption is the same whether in standby or actual recording.

Hence, recording time with the battery pack will be extremely short. For best results in interval recording, use

the CA-E7 Compact Power Adapter or the optional CB-E7 Car Battery Adapter.

• The camera will automatically turn off after about six hours of interval operation in order to protect camera parts

from damage.

• Noise occasionally may occur at intervals.

• Use only SP mode for interval timer function.

Self and Interval Timer Recording