Connection procedure, Selecting video channel, Using tv/vtr without audio/video inputs – Canon E800 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using TV/VTR without Audio/Video Inputs
monaura
F
Connection Procedure
• You need the RU-E3 RF Unit and a power source for playback on a TV
that does not have Audio/Video inputs.
• Refer to the RU-E3 RF Unit instructions on p.28.
* All components of the supplied RU-E3 RF Unit.
Using TV/VTR with S-video compatible SCART terminal STEREO
Connection Procedure
• You need the optional PC-270 SST S-stereo SCART Cable and a power
source for playback on a TV that has a SCART terminal.
• When using TV/VIDEO with SCART terminal, use PC-170 ST SCART
cable or PC-150 SCART cable.
TV
Remove Audio/Video
Compartment Cap
VTR
Set to LINE IN mode
Selecting Video Channel
European model
xhg video channel is the channel in your area not occupied by a
broadcasting station, that may be used for playback and monitoring, (channel
30—39 selectable, European model; channel 0 or 1 selectable, Australian
model).
If you are using a TV without audio/video inputs, set both the TV and the
RF Unit to the video channel for playback. To set the video channel on the
Australian model
RU-E3, use a small flat-edge screwdriver.
Playback Connection Procedure
27