Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN - Manual (Page 87)

Du eos
Videos recorded in this camcorder can be dubbed to a VCR or
DVD/HDD recorders,
I • Videos are dubbed to the other recording device via analog data
I tsansfer. (composite connection) Use the supplied Audio/Video cable.
• Use the AC power adaptor to power the camcorder when you dub
to a VCR or DVD/HDD recorder.
Connect your camcorder to the recording device (VCR or DVD/
HDD recorder) with the Audio/Video cable.
• Connect your camcorder to the input jacks of the recording
device.
• If your recording device has an input selector, set it to the
correct input mode.
Insert the storage device (tape, disc, etc.) into the recording
device.
VCR or DVD/
HDD recorder
VIDEO AUDIO
@© ©
Signal flow
Audio/Video cable
Start the playback on your camcorder, and record it on the
recording device.
• Refer to the instruction manuals supplied with your recording
device for details.
When dubbing is finished, stop the recording device, and the
your camcorder.
• Videos recorded on this camcorder can only be dubbed using
the Audio/Video cable in SD (standard definition) image quality,
regardless of the recording resolution (HD/SD).
• You cannot dub to a recorder with an HDMI cable.
• To copy a video recorded in HD (high definition) image quality in HD,
use the built-in software of your camcorder, and copy the video to
your computer, '•page 87
• Because dubbing is performed via analog data transfer, the image
quality may deteriorate.
• To hide the screen indicators (such as the counter, etc.) on the
screen of the connected monitor device set “TV Display: OFF", "•page 68
• To record the date/time, display it on the screen, "“page 68
83