Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN - Manual (Page 44)

Basic recording
ZOOMING
This camcorder allows you to reoord using optioal XI0 zoom and
digital zoom by rotating the
Zoom diai or touohing the Zoom
(El) tab on the LCD screen.
Rotate the Zoom dial towards T (telephoto). Or touch the Zoom
(El) tab, and then touch the Telephoto { * ) lab
® The distant subjeot is gradually magnified.
® The highest zoom magnification ratio is X10 in the normal zoom-in.
40
Rotate the Zoom dial towards W (wide-angle). Or toueh the Zoom
(El) tab, and then toueh the Wide-angle ( ) \ab
® The subject gets smaller and further away.
® The smallest zoom ratio is the subjeet’s original size in the zoom-out.
T: Telephoto
W: Wide-angle
Using the optical zoom does not degrade the image quality and cfarity.
Use the digital zoom when you want to zoom more than the optical zoom
range, ‘-•page 65
Focusing may become unstable when you record with a fast zoom or
zoom into a subject standing too far away. If this occurs, use the manual
focus function. (Video recording mode only) -“page 53
The minimum distance you can have between the camcorder and subject
while maintaining sharp focus is about 1 cm (about 0.4 inches) for wide
angle and about 1 m (about 40 inches) for telephoto, if you want to shoot
the subject close to the lens at a wide angle, use the Tele Macro function,
-“page 64
Frequent use of the zoom function consumes more power.
The camcorder can record the sound of the zoom mechanism.