Compaq Deskpro 2000 - Manual (Page 143)

Compaq Deskpro 2000 Series of Personal Computers 6-1
chapter 6
R
EMOVAL AND
R
EPLACEMENT
P
ROCEDURES
- M
INITOWER
This chapter provides subassembly/module level removal and replacement procedures for minitower
models of the Compaq Deskpro 2000 Series of Personal Computers.
After completing all necessary removal and replacement procedures, run the Diagnostics utility to
verify that all components operate properly.
6.1 Serial Number
The computer serial number should be provided to Compaq when requesting information or ordering
spare parts. The serial number is displayed on the right side of the hood toward the front
1 and on
the rear of the chassis above the expansion slots 2.
Figure 6-1. Serial Number Location