Canon BJC-3000 - Manual (Page 92)

92 Setting the Printer Driver
Preparing and Executing a Print job
Before you start a print job, you need to specify the print settings. The print settings in the
printer driver allow fine control over the print quality and colour adjustment, but you can sim-
plify the setup procedure as follows.
1
Set the paper size you use from within the application program before print-
ing.
2
Select the command used for printing (e.g., "Print" or "Print Setup" in the
File menu) in the application program.
3
Click the Properties button to open the Printer Properties dialogue box,
then select the desired icon (i.e., print mode) in the Choose Print Mode box
under the Main tab.
• The most appropriate print settings are pre-registered in each icon for a
particular type of print job.
• The BJ Cartridge and Media Type settings are selected automatically.
4
Make sure that the BJ Cartridge and Media Type settings match the BJ
Cartridge and print media you use for printing. (Change the settings, as
needed.)
Windows