Canon BJC-3000 User Manual

Page 242

Text mode
Original mode

242

Troubleshooting - Printer Does Not Start or Stops in Mid-job

Cartridge holder does not move to the left side

Check 1

Is the printer switched on?

Check the POWER lamp and make sure that it is green. If the POWER
lamp is off, switch on the printer.
If you have just turned on the printer and the POWER lamp flashes green,
the printer is warming up. Wait until the POWER lamp stops flashing.

Check 2

Has the front cover been open longer than 10 minutes?

If the front cover remains open longer than 10 minutes, the cartridge holder
automatically returns to the home position to prevent the print head from
drying out.
Close the front cover and open it again. The cartridge holder moves to the
left side.