Canon BJC-3000 - Manual (Page 227)

227 Troubleshooting - Printout is Unsatisfactory
Last part of print job not printing
Check 3 Is the printer port set to ECP?
When the printer port of the computer to the ECP mode, the printer may not
perform a print job properly. Cancel the ECP mode, and print again.
If the problem is not solved, contact your hardware manufacturer.
Check 4 Is a WPS printer driver installed?
You may not be able to print correctly with a WPS (Windows Printing Sys-
tem) printer driver installed in your system. Confirm whether or not a WPS
driver is installed in your system.
Change the WPS driver port setting to FILE or delete the WPS driver.
To change the port setting, follow the procedure below.
1
Open the WPS Driver Properties window.
2
In the Details tab, select FILE in the Print to Port setting.
3
To delete the WPS driver, select Programs and then Windows Printing Sys-
tem from the Windows Start menu and click Uninstall.
Windows
Windows