Canon BJC-3000 - Manual (Page 60)

60 Printing on Paper and Other Media
Using Back Print Film
4
Select the most appropriate icon that indicates the print mode in the
Printer Properties dialogue box. Specify the media type (Back Print Film),
and the BJ Cartridge you are using.
5
Start the print job.
6
Remove each printed back print film as it is ejected from the printer.
Do not touch the printed side until the ink is completely dry. About 15 min-
utes is required for drying.
• An image is reversed when printed on back print film in order to display
correctly when lit with a backlight.
• After drying cover each back print film with one sheet of plain paper
(uncoated) to prevent sticking and abrasion. Cover each back print film
as well if you are storing them in plastic pockets to prevent the film from
sticking to the plastic.
• Store unused film in the original package in a dry, cool location away from
direct sunlight, high temperature, and high humidity.
Macintosh
Note