Cabletron Systems 2H28-08R - Manual (Page 95)

System Resources Screen
2H28-08R SmartSwitch 2208 User’s Guide 5-47
Figure 5-19 System Resources Screen
The following defines each field of the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 2H28-08R.
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 2H28-08R and
how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 2H28-08R and how much
of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 2H28-08R and how
much is currently available.
Firmware Revision: XX.XX.XX
System Resources
2286-23
Device Type: 2H28-08R
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : 4 MB
DRAM Installed: 16 MB
NVRAM Installed: 32 KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 25 Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
2H28-08R LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN EXIT