Cabletron Systems 2H28-08R - Manual (Page 121)

Network Tools
2H28-08R SmartSwitch 2208 User’s Guide 5-73
• help – If “help” is typed at the prompt, once ENTER is pressed, the
screen will display all commands available for the device.
The commands are presented in the following format:
command:
Syntax: Shows the required command format. It
indicates where arguments, if any, must be
specified.
Description: Briefly describes the command and its uses.
Options: Lists any additional fields in the appropriate
format which may be added to the command.
Example: Shows an example of the command.
NOTE
the
The conventions used in describing the commands in Network
Tools are as follows:
Arguments enclosed by [ ] are required.
Arguments enclosed by < > are optional.
In the following command examples, the information entered by
user is shown in bold Helvetica font
.
To abort the output or interrupt a process, press the CONTROL
key and c key simultaneously, designated as ^C here.