The port redirect function screen, Figure 5-21, Allo – Cabletron Systems 2H28-08R User Manual
Page 102: Source port (read-only), Destination port (read-only), Remap errors (read-only), Figure 5-21 port redirect function screen
Chapter 5: Local Management
5-54
2H28-08R SmartSwitch 2208 User’s Guide
To access the Port Redirect Function screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the PORT
REDIRECT FUNCTION menu item and press ENTER. The Port
Redirect Function
screen displays.
Figure 5-21
Port Redirect Function Screen
The following definitions briefly explain each field of the Port Redirect
Function screen:
Source Port (Read-only)
Shows which ports are currently set as source ports.
Destination Port (Read-only)
Shows which ports are currently set as destination ports.
Remap Errors (Read-only)
This field shows the current state of the Remap Error setting for the
specific port.
Firmware Revision: XX.XX.XX
Port Redirect Function
2286-22
Device Type: 2H28-08R
BOOTPROM Revision: XX.XX.XX
Source Port:
-----------------
1
1
1
1
2
2
3
3
Destination Port:
----------------------
2
3
4
1
3
4
5
6
Remap Errors
-------------------
ON
OFF
ON
ON
ON
ON
ON
ON
2H28-08R LOCAL MANAGEMENT
Event Message Line
SAVE
PREVIOUS
RETURN
RETURN
NEXT
Source Port [1]
Destination Port [1]
Status [ADD]
EXIT
Errors [ON]