Cabletron Systems 2H28-08R - Manual (Page 120)

Chapter 5: Local Management
5-72 2H28-08R SmartSwitch 2208 User’s Guide
5.21 NETWORK TOOLS
The Network Tools function allows the user to access and manage
network devices.
Figure 5-27 shows the Network Tools Help screen.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools screen displays.
Figure 5-27 Network Tools Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are three categories of commands in the command set:
• Built-in Commands – Allow the user to access and manage network
devices. The commands are: arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft_reset, telnet, and link_trap.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
Commands Available to the User:
-> help
22511-75
arp
netstat
show
defroute
ping reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help '.
->
Built in Commands:
traceroute
soft_reset
Welcome to Network Tools
telnet link_trap