Cabletron Systems 2H28-08R - Manual (Page 114)

Chapter 5: Local Management
5-66 2H28-08R SmartSwitch 2208 User’s Guide
MTU (Read-Only)
The MTU (Maximum Transmission Unit) field displays the maximum
frame size (in octets) that a frame may contain to be received or
transmitted from this interface.
Speed (Read-Only)
The Speed field displays an estimate of the interface’s current bandwidth
in bits per second.
Link Status (Read-Only)
This field displays the current link status of the interface. This field
displays either “Link” or “No Link”.
Duplex Mode (Read-Only)
This field indicates whether the interface is operating in normal (standard)
or full duplex mode. This field displays the actual setting of the port, or
“Standard”, or “Full Duplex”.
Interface [nn] (Command)
This field is used to select an interface number for viewing statistics. For
instructions on how to use this field refer to
Section 5.19.1 .
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to
Section 5.19.2 .
5.19.1 Displaying Interface Statistics
To display the statistics for any interface, proceed as follows:
1. Use the arrow keys to highlight the Interface [nn] field at the bottom
of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to
decrement) the interface number.
Press ENTER (neither the Interface # field nor the statistics will update
until ENTER is pressed).