Cabletron Systems 2H28-08R - Manual (Page 60)

Chapter 5: Local Management
5-12 2H28-08R SmartSwitch 2208 User’s Guide
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
3. Exit from 2H28-08R Local Management by repeating steps 1 and 2
until the Device Menu screen displays.
4. To end the LM session, use the arrow keys to highlight the RETURN
command at the bottom of the Device Menu screen.
5. Press ENTER. The Local Management Password screen displays and
the session ends. If in a Telnet session, the session ends without
returning to the Local Management Password screen.
NOTE
The user can also exit Local Management screens by pressing
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes are lost.