Cabletron Systems 2H28-08R - Manual (Page 28)

Chapter 3: Installation
3-2 2H28-08R SmartSwitch 2208 User’s Guide
3. Remove the black and yellow tape seal on the non-conductive bag to
remove the 2H28-08R.
4. Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact the
Cabletron Systems Global Call Center as described in
Section 1.6 ,
Getting Help .
3.3 INSTALLING OPTIONAL EQUIPMENT
If the 2H28-08R is to be installed with an optional Fast Ethernet Interface
Module, refer to
Appendix C for installation instructions.
Table 3-1 Contents of 2H28-08R Carton
Item Quantity
2H28-08R 1
Antistatic Wrist Strap 1
Console Cable Kit 1
Rackmount Kit 1
Strain-Relief Bracket 1
Manual Accessory Kit 1
Power Cords 2
NOTE
Install any optional equipment before proceeding to
Section 3.4 .