Dell PowerEdge T710 - Manual (Page 36)

36
About Your System
E2110 Multibit Error
on DIMM ##.
Reseat DIMM.
The memory module in
slot “##” has had a multi-
bit error (MBE). See "Troubleshooting
System Memory" on
page 167.
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
The system BIOS has
disabled memory single-
bit error (SBE) logging
and will not log anymore
SBEs until the system is
rebooted. "##" represents
the memory module
implicated by the BIOS. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 167.
E2112 Memory spared
on DIMM ##.
Power cycle
AC.
The system BIOS has
spared the memory
because it has determined
the memory had too many
errors. "##" represents the
memory module
implicated by the BIOS. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 167.
E2113 Mem mirror OFF
on DIMM ## &
##. Power
cycle AC
The system BIOS has
disabled memory
mirroring because it has
determined one half of the
mirror has had too many
errors. "## & ##"
represents the memory-
module pair implicated by
the BIOS. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 167.
I1910 Intrusion
detected.
Check chassis
cover.
System cover has been
removed. Information only.
Table 1-1. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 36 Monday, June 15, 2009 11:33 AM