Dell Precision 220 User Manual
Page 31
6. Slide the drive into the chosen bay of the bracket, oriented so that the connectors on the back of the drive will face the back of the chassis
when the bracket is reinstalled (see
).
7. Align the four screw holes of the drive and bracket. Insert and tighten the screws that came with your upgrade kit (see Figure 2).
Figure 2. Inserting a Hard-Disk Drive in the Bracket for the Mini Tower Chassis
8. Reinstall the hard-disk drive bracket in the chassis (see
Insert the bracket into the drive cage by sliding it in until the tabs snap into place. Rotate the drive door up and toward the chassis until it
snaps securely into place. Be sure to fold down the drive door handle (see
) so that the front panel can be replaced on the chassis.
Figure 3. Inserting the Drive Bracket in the Mini Tower Chassis
1 Hard-disk drive bracket
2 Drive door handle
3 Drive door
1 Drive bracket
2 Second drive bay
3 Drive
4 Screws (4)
NOTE: When you rotate the drive door back into place, make sure that the tabs on the drive door are inserted between the
drive bracket and the drive cage.