Dell PowerVault DP600 - Manual (Page 61)

61
For this backup frequency Depending on retention range, you can configure
backup
• Date and time for yearly backup
Yearly
• Date and time for yearly backup
Selecting Library and Tape Details
If you select protection using tape, you must specify the number of copies of each tape that DPM
should create and the configuration options for the backup tapes. You also specify whether you
want DPM to encrypt and compress the data, and if you want DPM to check the backup for data
integrity.
If you are not using long-term protection, skip to Choosing a Replica Creation Method .
To select tape and library details
1. On the Select Library and Tape Details page, in the Primary library section, do the
following:
• In the Library box, select the library that you want to use for your tape backups.
• In the Drives allocated box, select the number of drives you want to allocate for the
tape backups.
2. In the Copy library section, select the library you want to use for multiple backup copies.
Note
Use Copy library only if you specified that you wanted multiple tape backup
copies. If you did not specify multiple copies, accept the default library (same as
the primary Library).
3. In the Tape options for long-term protection section, do the following:
• Select Check backup for data integrity to check for data integrity between the
backup copy versions.
• Select the Compress data option to enable data compression on tape, which
reduces the space needed on the tape and increases the number of backup jobs that
can be stored on the same tape.
• Select the Encrypt data option to encrypt the data before it is written to tape, which
increases the security for archived data.
• Select the Do not compress or encrypt data option if you do not want DPM to
perform data compression or encryption.
4. Click Next.